Coherent Bioray Compact 405nm Laser (405nm 100+mW) Adjustable Focus SMA Launch

Description

This auction is for a Coherent BioRay 405nm Compact Laser System.  (405nm 100+ mW)
These are compact lasers which include a laser diode driver and rs-232 interface for monitoring and control of the laser.
This particular laser has a wavelength of 405nm.  Measured output was 80mW after the fiber launcher.  Output power is 100mW with the sma fiber launcher removed.
Laser has 3036 hours.
This model has the sma fiber launch option.  You can remove this to have a free space beam.
Tem00 mode.  Adjustable focus.
I am including the rst connector so you can make your own power/data cable.  If you need help let me know.
The laser and controller can be stacked on top of each other for a compact form.
These run off a 5V to 24V dc power supply.  The 'modulation' input is used to control laser output power as well as modulation.
I have these in other wavelengths such as 405nm, 450nm, 640nm, 647nm, 785nm.  Please ask if interested.
I will include a pdf copy of the user manual.  I will email you the control software 'Coherent Connection'
Please ask if you have any questions.
Buyer to pay shipping.
Thanks for looking!
BioRay is Coherent’s compact high-performance laser for Life Science applications with an elliptical beam output with a user-adjustable beam divergence (adjustable focus). With BioRay, the elliptical beam is easier to integrate into today’s particle measuring systems. With RS-232 control the laser power is adjustable as well as on-board diagnostics for operating hours, diode current, output power, temperature, and more.
Select StingRay and BioRay also include the μFocus and Fiber-Ready (FR) versions.
FEATURES
• 405 nm to 830 nm
• Power up to 200 mW
• User adjustable focus
• Pointing stability <10 μrad/°C
• Analog or digital modulation
• Microprocessor controlled
• Onboard diagnostics monitor
• RS-232 control option
• Power supply range: 5 to 24 VDC
• ESD protection, over-temperature protection, and reverse polarity protection
• Optional fiber-ready version
StingRay and BioRay
Datasheet
LASER OUTPUT SPECIFICATIONS
Spatial Mode
TEM
00
(Single Transverse Electric Mode)
Beam Quality, M
2
(ModeMaster with 90/10 Clip Level)
<1.5
Pointing Stability over Temperature (μrad/°C)
<10
Beam Angle (boresight) (mrad)
<3
RMS Noise (%) (20 Hz to 20 MHz)
<0.5
Peak-to-Peak Noise (%) (20 Hz to 20 MHz)
<1
Long Term Power Stability (%) (over 8 hours and ±3°C)
<2
Warm-up Time (minutes)
<5
LASER ELECTRICAL SPECIFICATIONS
Operating Voltage (V DC)
+5 to +24 (recommend 12 VDC for best efficiency)
1
Operating Current (mA) (maximum at 25°C)
200
Power-on Delay (seconds) (if enabled)
5
Power Consumption (W)
<5
ESD Protection
N61326-1 (8 kV Air Discharge, 4 kV Contact Discharge
LASER MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10 to 50°C (except 450 nm, 520 nm, and 525 nm with 10°C to 40°C)
Non-Operating (storage) Temperature
-20 to 60°C
Weight (grams) (standard model)
<70
Diameter (mm)
19.05
Material
Aluminum 6061 T1