FLEX HONE GB31412 Cylinder Hone, 3-1/4" (83 mm) Diameter, 120 Grit

Description

FLEX HONE GB31412 Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter, 120 Grit
The Brush Research GB31412 FLEX-HONE is a cylinder hone with a 3-1/4" (83 mm) diameter and a 120 grit size. It uses a silicon carbide abrasive. The Flex-Hone tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material.
Features
Surface Finishing - The Flex-Hone Tool is available in a variety of abrasive types and grit selections to provide the optimum surface finish on any base material
The Flex-Hone is commonly used to reduce Ra, Rk and Rpk values while maintaining Rvk and Vo volume for oil retention
Using the Flex-Hone Tool for surface finishing allows the sizing tools to do their jobs quickly and accurately without fighting surface finish
The Flex-Hone is also used in adhesive bonding applications where a rougher surface is desired for bonding integrity
Deburring - Debarring of cross drilled holes is an expensive, time consuming operation. The Flex-Hone Tool can be used to remove burrs from cross drilled holes leaving a clean, radiused intersection
Because of its unique construction, the Flex-Hone can be used online in machine tool applications or offline as a secondary operation
The tool is self-cantering and self-aligning to the bore so elaborate, rigid set-ups are not required
It is advisable to use the tool in the main bore into which the cross holes break
Best results are obtained by rotating and stroking the tool a few strokes in a clockwise direction, removing the tool from the part, reversing the spindle and then rotating and stroking the tool in a counter clockwise direction for a few more strokes
This forward and reverse rotation creates a more symmetrical debarring pattern
Plateau Finishing - Brush Research pioneered the concept of a plateau finish and is a strong proponent of the benefits of a cross hatch, plateaued finish
The concept involves removing the peaks produced by prior machining operations and creating a substantially flat or plateau finish
A plateau finish created by the elimination of peaks allows rings and seals to seat without damaging their edges
The cross hatch pattern will aid in lubrication control and retention, reduce seepage in hydraulic and pneumatic applications and promote longer seal life
Description
Flex-Hone Tool
Type: Standard Duty
Capacity: 3-1/4 to 3 Inch (Bore)
Size: 3-1/4 Inch Diameter x 13-1/2 Inch Length
Applicable Standard: ISO 9001
Abrasive Type: Silicon Carbide
Grit Size: 120
End Marking Color: Silver
Applications: Automotive, Military, Aerospace, Marine, General Industrial, Manufacturing, Oil and Gas, Firearm, Musical Instrument, Fluid Power, Hydraulic, Aluminum Extrusion, Earth Moving Equipment
Specification
Order Part Number: BSGB31412
Item Description: FLEX-HONE Cylinder Hone, GB Series, Silicon Carbide Abrasive, 3-1/4" (83 mm) Diameter, 120 Grit Size
Manufacturer: Brush Research Manufacturing Co., Inc.
Manufacturer Part Number: GB31412
Country of Origin: US
Harmonization Code: 82079000
Default Selling Unit: EA