VTech DM221 Digital Audio Baby Monitor

Description

VTech DM221 Digital Audio Baby Monitor. Shipped with USPS Priority Mail.
New open box
he VTech DM221 Digital Audio Monitor with DECT 6.0 digital technology provides crystal clear transmission, eliminating the annoying white noise you hear from analog monitors. The only sounds you hear are coming from your baby. Totally digital transmission eliminates background noise and prevents interference so you can rest assured the only sounds you—and only you—will hear are your baby's. Make sure the Baby Unit is turned on. Move the Parent Unit closer to the Baby Unit, but not closer than 1 meter / 3 feet. If you are using the Parent Unit in cordless mode, the battery may be low and requires recharging. A full charge takes 12 hours. Reset the system by disconnecting power from both units, waiting at least one minute, then reconnecting power. Allow time for the two units to link to each other. Nearby cordless phones or other electronic devices may be interfering with the baby monitor. Separate these devices as far apart as possible. When you turn the nightlight on, if no sound is detected for 15 minutes, the light will turn itself off.
Simply connecting power for both units and allow 1-min for the units to link to each other.
Crystal clear sound with DECT 6.0 digital technology. The best reception can be obtained by placing units away from cordless phones or other electronic devices, and make sure the parent unit is 3 feet (1 meter) away from the baby unit.
You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain VOX level. And set the parent unit to alert you with sound or vibration.
The parent unit is operated with the rechargeable battery or by AC power. A fully charged battery can operate 9 to 16 hours depending on monitor's sensitivity settings. As it takes up to 11 hours for the battery to be fully charged, turn the parent unit off while charging can help shorten the charging time.
The parent unit is preset to plays an audio Safety Reminder when it is connected to a baby unit. You may turn it off by pressing MENU / REMINDER / SELECT / OFF after your initial set up.